Regardless of its quality, every engine oil eventually loses its potency and must be changed to ensure peak engine protection. In this blog, we take a look at what happens to the engine oil over time and why you periodically need to change the oil.
The interaction between oxygen molecules and engine oil molecules naturally leads to chemical breakdown. Just as oxygen causes a cut apple to brown or exposed metal to rust, it breaks down base oils and reduces engine oil’s effectiveness. Oxidation can lead to increased oil viscosity, which negatively affects energy efficiency. It also causes the formation of harmful deposits and sludge. Today’s engines run hotter than ever before, with temperatures up to 113ºC, and even higher if towing or hauling.
The rate of oxidation for oil doubles for every 10°C increase in temperature. Your vehicle is subjected to temperature swings, even when it is parked in the garage. Those temperature swings cause condensation to form inside your engine, leading to water contamination. Leaving a vehicle parked for extended periods or taking short trips that don’t allow the automotive lubricant oils to fully warm up allows water to remain in the oil rather than evaporating and exiting through the tailpipe. Water can lead to formation of sludge…yet another reason why you must change the oil.
Viscosity in engine oil’s most important property. The lower the viscosity, the faster the oils flows, like water. Thicker oils flow more slowly, like honey. A hydraulic engine oil viscosity is its most important property.
Viscosity has a direct bearing on wear protection, and your engine is designed to operate best using an engine oil of a specific viscosity (e.g. 5W-30). The intense pressure the oil bears as it’s squeezed between moving parts, like the piston ring/cylinder wall interface, can tear apart, or shear, its molecular structure, leading to viscosity loss.
Suddenly, the passenger car engine lubricant oil your motor was designed to use is now essentially a 5W-20 oil, and wear protection may be compromised. When this happens, it’s time to change your oil. Fuel can wash past the piston rings and contaminate the engine oil, causing it to lose viscosity. Frequent short trips that don’t allow the oil to reach normal operating temperature can be especially problematic because the fuel won’t volatilize and exit through the PCV system.
For example, antioxidants additives help slow the rate of oxidation. Detergency additives help prevent deposits and sludge while cleaning pre-existing deposits. Formulators add anti-wear additives to some Gear lubricant oils UAE to form a sacrificial barrier on metal components and help prevent wear. Since they’re sacrificial in nature, additive depletion is one of the primary reasons’ engine oil loses its effectiveness and must be changed.
While Technolubeuae gives you the convenience of fitting oil changes into your schedule, it remains vital to install fresh oil at the appropriate time.
