NATIONAL GREASE HI-TEMP NLGI 2
National HI-TEMP GREASE is formulated with an inorganic thickener and highly refined base oil. It contains EP agent and rust inhibitors. National HI-TEMP GREASE possesses resistance to water washing and provides effective protection against rust and corrosion for both ferrous and non-ferrous metals.
Benefits
- Thickener does not melt, has extremely high dropping point.
- Will not soften and leak from bearings exposed to high temperature.
- Resistance to water washing, steam and humid conditions.
- Consistency maintained despite cycling temperature conditions.
- Good pump ability.
- Molybdenum enhanced EP characteristic.
Applications
National HI-TEMP GREASE is recommended for applications where continuous high temperatures or intermittent very high temperatures are experienced. The maximum usable temperature for Hi-Temp Grease for extended service is 200°C. National HI-TEMP Grease is recommended for application such as furnace door bearings and kiln car wheel bearings and for general industrial lubrication where non-melting grease is required. It can also be used in ambient temperature applications such as roll neck bearings where high resistance to water washing is needed.
Product Characteristics
| Properties | Units | Value | Test Method |
|---|---|---|---|
| NILGI GRADE | – | 2 | – |
| Color | – | Grey Black | Visual |
| Texture | – | Smooth | Visual |
| Thickener Type | – | Bentonite | – |
| Mineral Oil Viscosity @ 100°C | mm2/s | 25.0 | ASTM D-445 |
| Dropping Point | °C | >300 | ASTM D-2265 |
| Rust Test | – | Pass | ASTM D-1743 |
| Timken OK Load | kg | 18 | ASTM D-2509 |
| Worked Penetration at 25°C | mm/10 | 265/295 | ASTM D-217 |
| Oil Separation, mass % (max) | % mass | 3 | ASTM D-1742 |
| Operating Temperature | °C | Stationary Sys max 200 | – |
| °C | Stationary Sys max 275 | – | |
| MoS2 | % mass | 0.25 | ASTM D-4951 |
| Product Code | – | 017042 | – |